以上为EAB-0955-5V详细参数信息,EAB-0955-5V图片由Shenzhen Jialigao Electroacoustic Mall Co., Ltd. 提供,EAB-0955-5V
- 产品特性
Electrical Characteristics
Part No: EAB-0955-0527-45P5.0
Rated Voltage | 5VDC |
Operating Voltage | 4~7VDC |
*Sound Output at 10cm | ≥80dB |
*Current Consumption | ≤50mA |
Resonant Frequency | 2700±300Hz |
Coil Resistance | 12±3Ω |
Operating Temperature | -20℃~+80℃ |
Storage Temperature | -30℃~+85℃ |
Weight | 0.1g |
Housing Material | Black PPO |
Environmental Protection Regulation | RoHS |
Welding method | Artificial welding /wave soldering |
DIMENSIONS(UNIT: mm) Tolerance: ±0.5mm Except Specified
Note: Dust sticker on the top
RELIABLY TEST
项目 | 测试条件 | 试验后要求 |
---|---|---|
高温试验 | 放置85±2℃ 96小时,再室温放置2小时。 | 声压变化±10dB。 |
低温试验 | 放置-30±2℃ 96小时,再室温放置2小时。 | 声压变化±10dB。 |
恒湿试验 | 存放在温度:60±5℃湿度:90%--95%的环境里96小时,然后放置到室温下放置2小时后测试 。 | 声压变化±10dB。 |
温度循环试验 | 放置-30±2℃ 30分钟、25℃±10℃放置15分钟,15分钟后再将产品放入+85±2℃30分钟、常温25℃±10℃放置 15分钟,20个循环后放置常温下2小时。 | 声压变化±10dB。 |
跌落试验 | 正面和侧面从100mm高度只有跌落在4cm厚度的木板上3次。 | 声压变化±10dB。 |
振动试验 | 频率10~55Hz,振幅1.5mm,3个方向,振动2小时。 | 声压变化±10dB。 |
可焊性试验 | 端子在松香中浸入5秒并在260±5℃锡中浸3±0.5秒 | 有95%吃锡效果。 |
连续通电试验 | 温度:室温25℃ 电压:额定电压3.3V,频率:频率2.7KHz 时间:500小时 | 声压变化±10dB。 |
端子强度试验 | 在每个端子上施加9.8N(1.0kg)的轴向力 10秒。 | 端子没有明显的损坏和切断 |
Typical Frequency Response Curve
TESTING METHOD
Standard Measurement conditions
Temperature:25±2℃ Humidity:45-65%
Acoustic Characteristics:
The oscillation frequency, current consumption and sound pressure are measured by the measuring instruments shown below
In the measuring test, buzzer is placed as follows: